PRODUCT TESTING FOOTAGE
AND DEMONSTRATIONS.
Explore product testing videos, material demonstrations, and protection-related footage to better understand our products and test conditions.
WATCH TESTING VIDEOS BEFORE
CHOOSING YOUR GEAR.
All samples in the videos are randomly selected from our warehouse for testing. We demonstrate the performance of our products through real testing conditions and provide transparent protection information.
TEST FOOTAGE
LEVEL 4 PLATE TEST – STEP I
The plate was tied to an empty plastic bucket to simulate impact feedback; the first two rounds of shooting failed to break the empty bucket.
- 9mm – .45ACP
- Test Distance: 10 meters / 33 feet
- Test Date: May 2025
TEST FOOTAGE
LEVEL 4 PLATE TEST – STEP II
The .44 Magnum round struck the rim of the plate and overlapped with the .45 impact, resulting in damage to the empty bucket positioned behind it.
- .44Magnum .300 Blackout
- Test Distance: 10 meters / 33 feet
- Test Date: May 2025
TEST FOOTAGE
LEVEL 4 PLATE TEST – STEP III
7.62x39mm and .300 Blackout rounds struck the same point; a distinct indentation appeared on the back of the plate, but it was not penetrated.
- 5.56×45mm NATO (M855) — 7.62x39mm
- Test Distance: 10 meters / 33 feet
- Test Date: May 2025
TEST FOOTAGE
BALLISTIC HELMET TEST
The helmet was placed on a shooting target; after each shot, the size of the indentation on the back was inspected to determine whether it had been penetrated.
- .22 — 9mm
- Test Distance: 10 meters / 33 feet
- Test Date: Nov 2025
TEST FOOTAGE
BALLISTIC HELMET TEST – STEP II
The helmet perfectly withstood the impact of the .45, but the .44 Magnum—fired from a long-barreled weapon—inflicted severe damage upon it.
- .45ACP — .44 Magnum
- Test Distance: 10 meters / 33 feet
- Test Date: Nov 2025
TEST FOOTAGE
BALLISTIC HELMET TEST – STEP III
The helmet withstood one .300 Blackout bullet, while another penetrated the helmet. This test result is for reference only.
- .300 Blackout
- Test Distance: 10 meters / 33 feet
- Test Date: Nov 2025
TEST FOOTAGE
LEVEL 3A PLATE TEST – STEP I
Fire .22 and .30 SC rounds, and observe the depth of the indentation and whether penetration occurred.
- .22 — .30 SC
- Test Distance: 5 meters / 16.4 feet
- Test Date: Nov 2025
TEST FOOTAGE
LEVEL 3A PLATE TEST – STEP II
Fire using various calibers—including 9mm, .38 Special, .40 S&W, and .45 ACP—and observe the feedback from the plates.
- 9mm — .38 Special — .40 S&W — .45 ACP
- Test Distance: 5 meters / 16.4 feet
- Test Date: Nov 2025
TEST FOOTAGE
LEVEL 3A PLATE TEST – STEP III
Repeatedly fire the same caliber and inspect the back of the plate for signs of penetration.
- .45 ACP
- Test Distance: 5 meters / 16.4 feet
- Test Date: Nov 2025
TEST FOOTAGE
LEVEL 4 PLATE TEST – STEP I
The plate was placed in front of a pumpkin and tested with .30-06 and 5.56mm M855 rounds. The back of the plate was then inspected for deformation.
- .30-06 — 5.56mm Ball M855
- Test Distance: 10 meters / 33 feet
- Test Date: Nov 2025
TEST FOOTAGE
LEVEL 4 PLATE TEST – STEP II
A 9mm round was fired at close range into an area of the plate that had already sustained a previous impact.
- 9mm
- Test Distance: 5 meters / 16.4 feet
- Test Date: Nov 2025
TEST FOOTAGE
LEVEL 4 PLATE TEST – STEP III
The plate is introduced and the blunt-force damage sustained by the pumpkin behind it is demonstrated after testing.
- Test Type: Post-impact demonstration
- Test Distance: Not applicable
- Test Date: Nov 2025
TEST FOOTAGE
BODY ARMOR CHIP TEST – STEP I
Fire two rounds each using .22 and 9mm, then inspect the chip.
- .22 — 9mm
- Test Distance: 5 meters / 16.4 feet
- Test Date: March 2026
TEST FOOTAGE
BODY ARMOR CHIP TEST – STEP II
Fire using three types of projectiles and check if the bucket is damaged or pierced.
- .38 Special — .357 Mag — .45 ACP
- Test Distance: 5 meters / 16.4 feet
- Test Date: March 2026
TEST FOOTAGE
ARMOR T-SHIRT CHIP TEST – STEP I
Testing using multiple calibers of ammunition.
- .22 — 9mm — .45 ACP — .44 Mag
- Test Distance: 5 meters / 16.4 feet
- Test Date: August 2025
TEST FOOTAGE
ARMOR T-SHIRT CHIP TEST – STEP II
Check the defensive performance of the ballistic chip after shooting.
- Test Type: Post-impact inspection
- Test Distance: 5 meters / 16.4 feet
- Test Date: August 2025
TEST FOOTAGE
LEVEL 3A PLATE TEST – STEP I
Fire using different calibers and check for penetration.
- 9mm — .30 Super Carry
- Test Distance: 5 meters / 16.4 feet
- Test Date: May 2026
TEST FOOTAGE
LEVEL 3A PLATE TEST – STEP II
When struck by a .45 caliber round, the lack of a backing support or an outer covering resulted in a large cavity forming in the plate, though penetration did not occur.
- 9mm — .45 ACP
- Test Distance: 5 meters / 16.4 feet
- Test Date: May 2026
TEST FOOTAGE
BALLISTIC HELMET TEST – STEP I
Fire at the helmet shell using different calibers and examine the extent of the internal indentation.
- 9mm — .30 Super Carry — .45 ACP
- Test Distance: 5 meters / 16.4 feet
- Test Date: May 2026